April 10, 2014 6 Comments
The Belgian Swiss Army Knife
A few months ago when Ridley invited us to come to Belgium to learn more about their brand, we were pretty excited. When Ridley told us were going to be testing their bikes on cobbles, we were a little less thrilled. We’ve ridden cobbles before, and if you’ve ever wanted to know what’s like to ride a bike inside of a paint mixer, taking a spin down a Belgian lane is a pretty good approximation. We knew that Ridley makes some tough bikes though, so we figured this would be the ultimate test of a bike’s durability.
The Ridley Fenix is what Ridley describes as their “Swiss Army knife” bike. The bike was designed at the behest of the riders of Ridley’s pro-tour teams, who needed a bike that could conquer the long, brutal spring classics races in Italy, Belgium and France. Looking at lessons learned from the Damocles and the Excalibur, two of Ridley’s most successful bikes ever, Ridley’s designers came up with the Fenix. Built with a more “endurance” tuned geometry for improved comfort over long distances, flattened seat stays for improved compliance on the terrible cobbles, and diamond-shaped tubes for incredible durability and strength, the Fenix is one of the toughest, most versatile bikes ever.
About The Ride
Because Ridley had a lot of journalists and vendors visiting the week we were there (during that Tour of Flanders), the bike we ended up with wasn’t exactly spec’ed the same as the Performance-exclusive CR1 model (different crank, handlebars and saddle), but it was close enough to give us a general feel for the bike. And wow, were we impressed.
The Fenix more than lives up to its reputation. From the minute we first put a leg over the bike, it felt like it came alive. The handling was snappy, and the bike felt responsive from the first pedal stroke. On the pavement it handles like one of the finest race steeds we’ve ever encountered (in fact the bike more than held it’s own when we took it to the brutally fast Wednesday night ride at the famed Zolder Circuit), but where the bike really came to life was on the cobbles.
We’re not going to say that it made the cobbles smooth like butter–there’s only so much a bike can do, but the Fenix certainly made the ride less jarring than we remembered. Turning onto our first cobbled section at speed, we braced for the first bike impacts and tried to prepare for the bone shaking hits. We didn’t really need to though, since the Fenix definitely took some of the sting out of the cobbles. It was especially apparent in the saddle, where the flat-section seat stays made a noticeable difference and transmitted much less vibration and absorbed the worst of the hits.
The bike also held it’s line and tracked far better in the rough stuff than we were expecting. Even our lighter weight tester, who normally gets bounced off the cobbles pretty well and ends up all over the road, was able to find a line and hold it on the Fenix over some of the worst cobbles we encountered. On the one occasion when we did crash, the bike was just fine—thanks to the diamond shaped tubing that gives it a higher strength and makes the tubes more resistant to side impacts. After a few kilometers (sorry, we were in Europe), we could definitely see why the Lotto-Belisol guys love the Fenix.
About The Bike
After our experience testing the bike, we had a chance to talk with Joachim Aerts, founder of Ridley, and Dirk, the lead product developer, about what went into the bike. It turns out that the inspiration for the Fenix came not only from the shapes found in nature, but also from real world riding. Both of them grew up in Belgium, riding on the cobbled roads, and thought about the kind of bike they would want to ride on those roads. After getting more input from pro riders, they turned to the Lotto-Belisol mechanics, and asked for their opinions about the bike. Would it be easy to work on? Could it survive a crash? Did the internal cable routing make sense from a practical stand point? Once all these questions were answered and problems solved, and only then, did the bike move into production.
Ridley, and the Lotto-Belisol team, were so thrilled with the final product that they didn’t even make a special version for the pro team, which is fairly unusual in the bike industry. The pro riders literally get off-the-shelf Ridley Fenix bikes, painted in the team colors, and built up with their pro livery parts.
Overall, we’d say that the Fenix is one of the best all-around bikes we’ve ever ridden. Stiff enough to hold it’s own on one of the fastest group rides we’ve ever done, comfortable enough to ride all day on some of the roughest cobbles in the world, and tough enough to survive a fairly gnarly crash. If you want a bike for riding a charity ride, a gran fondo, and even racing, then this is definitely the bike for you. This bike not only gets our seal of approval, but the seal of Belgian approval as well.