Ridden and Reviewed: Lazer Sports Z1 Helmet

The Z1 in action in Belgium

Testing the Z1 in Belgium

Back in April we got a chance to visit Lazer Sports at their headquarters in Antwerp, Belgium to check out their Lazer Z1 helmet. This brand-new helmet is designed to improve performance, enhance safety, and keep the rider cooler.

We first got a chance to try it out during the Ronde van Vlaanderen Sportif, and have been giving it a longer term test drive over the last few months in a variety of conditions.

About The Z1

When designing the Z1, Lazer created a whole new line of helmets, instead of just improving on previous models. While the helmet retains Lazer’s signature look and the Roll-Sys basket suspension system, it goes in a wholly new direction from previous helmets. Lazer has traditionally focused on making very lightweight helmets, but with the Z1 they looked at ways they could improve on safety and aerodynamics, while still retaining their fabled lightweight.

The biggest safety improvement is the T-Pro design. The T-Pro is an area of the front of the helmet that comes down further to better protect the temples in the event of a fall, and offer better side impact protection. In studying how cyclists fall when they crash, Lazer’s designers realized that the temples, one of the most vulnerable parts of the head, were under-protected by existing helmet designs.

The Z1 also has a redesigned vent layout that helps channel around the head to keep you cool, the Advanced Roll-Sys adjustment system, and an integrated airfoil wing to improve aerodynamics. The back of the helmet also functions as a “glasses garage” for Lazer-brand sunglasses.

The buckle is also compatible with Lazer’s Café Lock, which lets you use your helmet as a (very) temporary bike lock when you make your coffee stop.

 

Out Of The Box

The Z1 comes in three sizes (S, M, and L), and includes a removable aeroshell covering, which snaps on to cover the vents, offering better protection from the cold and rain, and improving aerodynamics. It also comes with a small plastic piece that inserts into the top of the helmet and protects the Roll-Sys adjustment mechanism from mud and grit—an essential for cyclocross season.

 

The Z1 is the lastest evolution in Lazer's line of helmets

The Z1 is the lastest evolution in Lazer’s line of helmets

The Fit

The Lazer Z1 helmet definitely has a more comfortable fit than previous Lazer helmets, and the new Advanced Roll-Sys adjustment system makes it incredibly easy to fine tune and adjust the helmet. Like previous Lazer helmets, however, the fit isn’t for everyone. The shape of the helmet is similar to Giro or Specialized, which means it should fit those with a slightly rounder head a little better. If you have a more oval-shaped head, you might want to look at a different model of helmet.

Lazer's designers hand sculpted the original helmet mold to ensure the perfect fit

Lazer’s designers hand sculpted the original helmet mold to ensure the perfect fit

The Ride

We initially used the Z1 in Belgium, but have also been able to test it here at our offices in North Carolina. Our first impression is that it’s probably one of the lightest helmets we’ve ever used. For the past few years we’ve been riding the Giro Aeon—one of the lightest helmets around, and the Lazer Z1 helmet feels about comparable on the head. It is also noticeably cooler than previous Lazer helmets we’ve tried, with excellent airflow even on the hottest summer days we’ve encountered yet. Sometimes even the lightest helmets can still feel suffocating on really hot, humid days, but the Z1 has the nice combination of being lightweight and having huge vents, which we find provide excellent cooling options.

Fortunately we haven’t had a chance to test the improved safety features of the Z1 yet, but on the head it definitely feels more secure, and like it provides much more coverage. Just looking at the helmet in the mirror, we can see that it covers more parts of the head, especially on the side, which gives us a lot of confidence in it’s ability to protect if the worst should happen. It actually comes down far enough that you can see parts of the helmet in your peripheral vision, which took a little bit of getting used to.

The Aeroshell definitely helped us stay warm in Belgium

The Aeroshell definitely helped us stay warm in Belgium

The removable aeroshell is a nice addition too, since it turns the Z1 into a four-season helmet. On some shorter, faster group rides where overheating hasn’t been much of an issue, we simply snap the shell on to close off the vents and get some free speed. The aeroshell also provided excellent protection in the colder, windier, rainier climes of Belgium, where it  helped keep our heads warm and dry. We’ll definitely be using it over the off-season. Be forewarned though, with the aeroshell covering on, there is basically no airflow through the helmet, and it heats up quickly. If it’s hot out, we’d recommend leaving it at home.

One very small niggle one of our testers did have with the helmet was glasses storage. He likes to take his glasses off while climbing or when it’s really hot, and in other helmets he’s usually able to tuck them neatly into the helmet vents for storage. The Z1 vents though are only designed to hold Lazer-brand sunglasses, so his shades won’t stay in the helmet.

 

The Verdict

The Lazer Z1  is one of our favorite new helmets that we’ve gotten to test, and certainly the most versatile. The improved comfort and safety features alone make it well worth it. The included aeroshell and Roll-Sys protection plate also really add to the value of the helmet by making it much more versatile. In one package you essentially get four different helmets: a lightweight summer/climbing helmet, an aero helmet, a winter helmet, and a ‘cross/MTB helmet. It’s an incredible value for the money, and we highly recommend it.

We saw this at Lazer's headquarters. No idea what it is, but we thought we should share it with the world.

This isn’t the Z1– in fact we have no idea what it is, but we thought we should share it with the world.

3 Responses to Ridden and Reviewed: Lazer Sports Z1 Helmet

  1. Pingback: Eddie’s 100 Mile Mountain Bike Race Prep | The Performance Bicycle Blog

  2. i says:

    Where can you buy colored aeroshells or how do you paint it yourself? it was flexible so how can paint stay on if u bent the plastic?

    • David S says:

      Hello – we don’t carry the Lazer Z1 aeroshell right now, but presumably Lazer will offer them for sale soon. We have only seen the clear aeroshell in person, but pro teams have used colored versions, so Lazer will probably release those soon. You might be able to paint the clear aeroshell with a flexible plastic-specific paint, but there still might be some chipping since the aeroshell does get flexed quite a bit when you put it on.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 174 other followers

%d bloggers like this: